Bateau 25

The Bateau 25, the largest model in our Bateau fleet, can handle heavy loads with the same ease of maintenance and shallow water running ability. While still designed for the sound, the boat can go near-shore or ocean-side on nicer days. T-Tops are often added to the Bateau 25 for extended days on the water.

The Barge – There is no polite way to put this – the Bateau 25 is large. It’s ability to move heavier loads of equipment and  larger groups of people make it a favorite for commercial outfitters and extended families. In 2013, the boat received a Coast Guard certification to be used as a passenger Ferry – a testament to its strength and safety.

Length25’ 2”
Beam10′ 4″
Floor Width8′ 6″
Fuel Capacity51 gallons
Rec HP150
Max HP300
Shaft Length25″
Hull Weight2500 lbs.
Person Capacity20
Person Load3700 lbs.
Max Load4300 lbs.

Fuel & Electrical

  • 51 Gallon Built In Fuel Tank
  • LED Pop-Up Bow Light
  • LED Lights (Cockpit, Navigation and Anchor)
  • Battery, Tray and Wiring Harness to Console
  • Six Gang Booted Switch Panel
  • Ten Blade Fuse Block

Console

  • Super Fish Console (STD)
  • Super Fish Windshield
  • SeaStar Hydraulic Steering
  • Stainless Steel Steering Wheel
  • Console Grab Rail
  • Console Fold-Down Storage Hatch
  • USB Accessory Outlet

Hull, Deck & Cockpit

  • 100% Composite Construction
  • Fiber Glass Stringer Grid
  • Self Bailing Cockpit
  • Accu-Track Hull for Sure Turning and Handling
  • Under Gunwale Poly Rod Racks
  • Automatic Bilge Pump
  • Flush Anchor Locker
  • Foam Flotation
  • Pull-Up Bow Cleat
  • Heavy Duty Rub Rail/SS Insert
  • Jump Seats
  • Non-Skid Gunwales and Cockpit
  • Rigging Conduit Beneath the Floor
  • Stainless Steel Fuel Fill
  • Standard Nylon Cleats (Stern)

Power

Jones Brothers exclusively uses Yamaha engines and accessories when rigging boats. The following engines are available on the Bateau 25:

  • Yamaha F150XCF200XCF200XSA or F250XCB 4-Stroke Engine
  • Package includes complete instrumentation, stainless steel propeller, rigging and 10 micron stainless steel fuel filter

For more information, examine the Jones Brothers engine options and rigging pages.

Yamaha PowerMatched™ System Warranty

All boats built by Jones Brothers Marine qualify for the Yamaha PowerMatched™ System warranty. This gives buyers a warranty on the entire power system, which matches the three year warranty that comes with the four stroke engine. In addition to the engine warranty, the PowerMatched warranty includes:

  • Digital Gauges
  • Ignition Switch
  • Controls
  • Wiring Harness
  • Fuel Filter
  • Control Cables
  • Stainless Steel Propeller

Options (chart)

  • 12″ Hand Rails
  • Bimini Top
  • Box Seat
  • Box Seat Cushion
  • Compass (Ritchie HF742) – Flush Mounted
  • Console Cooler
  • Console Cover – Half
  • Console Cover – Full
  • Console Cushion Set
  • Console Fly Rod Holders
  • Console Rod Rack (Aluminum)
  • Console Upper Storage Box
  • Console Upper Storage Box with Electronics Flush Kit
  • Custom Hull Color
  • Dash Storage Box
  • Dual Batteries, Trays, Switches and Wiring Harness
  • Edson Steering Wheel
  • Extra USB Accessory Outlet
  • Flush Mounted Rod Holders
  • Helm Master EX Kit – Joy Stick
  • Helm Master EX Kit + Joy Stick
  • Jump Seat Cushions
  • Lean Post – Aluminum with Storage Box
  • Lean Post – Fiberglass (STD) with Livewell
  • Lean Post Backrest without Rocket Launchers
  • Lean Post Backrest with Rocket Launchers
  • Lean Post Cover for Aluminum LP
  • Lean Post Cover for Fiberglass LP
  • Olive Drab Hull & Accessories
  • Pull-Up Spring Line Cleats
  • Pull-Up Stern Cleats
  • Swim Platform
  • T-Top Enclosure
  • T-Top with Rocket Launchers
  • Trolling Motor Wiring
  • Washdown System

Disclaimer – Due to the price volatility of marine components and accessories, the prices in the Quick Quote estimator may not always be accurate. While Jones Brothers tries to maintain accurate information on the website, the prices should be considered “estimates.” For an official quote, please continue to the last page in the estimator. This optional step emails your contact information and boat configuration to a company representative.

Previous slide
Next slide

On hand-held devices, please rotate the device sideways to view full images.

Bennett Electric Trim Tabs

Previous slide
Next slide

Jump Seat Cushions

Previous slide
Next slide

Casting Platform Cushion (Bow)

Previous slide
Next slide

Lean Post Cover for Aluminum LP

Previous slide
Next slide

Console Cooler

Seafoam Green
Olive Drab
Ice Blue
Fighting Lady Yellow
Flag Blue
Previous slide
Next slide

Custom Hull Colors

b17-olive-drab2

Olive Drab Hull & Accessories

Previous slide
Next slide

Bimini Top

Previous slide
Next slide

USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Previous slide
Next slide

Edson Steering Wheel

IMG_0306

Console Fly Rod Holders

Lean Post Cover for Fiberglass LP

Previous slide
Next slide

Console Cover – Full

Previous slide
Next slide

Dual Batteries, Trays, Switches and Wiring Harness

Previous slide
Next slide

Washdown System

box_seat_cushion

Box Seat with Cushion

removable_leanpost-01

Removable Leaning Post – This option is only available on the Cape Fisherman 20/23 with the optional forward casting deck.

Pop-Up Pole Mounts

Poling Platform (Aluminum)

custom_hull_2tone-03

Custom Hull 2Tone with Boot Stripe

Previous slide
Next slide

Casting Platform/Fish Box Forward

Previous slide
Next slide

Compass (Ritchie HF742) – Flush Mounted

T-Top Enclosure

t-top-04

T-Top with Rocket Launchers

stainless_hand_rails-02

12″ Aluminum Hand Rails

Previous slide
Next slide

Pull-Up Spring Line Cleats

lean_post_backrest-03

Removable Lean Post Backrest with Rocket Launchers

Previous slide
Next slide

Lean Post – Aluminum with Storage Box

Previous slide
Next slide

Extra USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Dash Storage Box

Previous slide
Next slide

Console Upper Storage Box

Console Rod Rack

console_cushion_set-02

Console Cushion Set

Console Cover – Half

Swim Platform