Cape Fisherman 1910

We believe the Cape Fisherman 1910LT is the finest big-water lite-tackle fishing boat available today. The 1910LT offers enough beam and freeboard for rough waters and inlets, and has the driest ride you will find in a boat this size. Super-clean decks with pop-up cleats and bow lite keep fly lines from snagging. You will also find the most useful storage compartments for any boat its size. Custom designed rod racks and tubes protect your fly rods and conventional tackle. The 1910 LT has a low profile console/windshield, two watertight compartments, and grab rails that are the perfect height whether standing or sitting.

In the bow, non-skid casting platforms are truly fly friendly and at the stern you will find one of the most innovative features on any boat in America today. Between a large dry storage area on the starboard side and an oval livewell on the port there is an ingenious bridge that serves as both the stern casting platform and as a seat for the captain and passengers. When not needed, the bridge can be folded over, giving the same walkthrough characteristics as a center console. The folded-over bridge is faced with a large cutting board.

Perhaps the most significant aspect of the bridge platform is that it allows water to go through the boat and out over the stern quickly. While most lite tackle boats with a large enclosed area tend to trap water, the Cape Fisherman LT provides superior fore and aft casting platforms with the ability to drain quickly and completely.

The Cape Fisherman 1910LT features standard Lenco trim tabs for balancing loads and navigating shallow water as well as hydraulic steering for ease of handling in heavy seas. Fuel capacity is 57 gallons and gives the boat phenomenal range.

This boat was designed for fisherman by fisherman. We believe there is no better boat in its size class for the fly fisherman or lite tackle angler. Safe, seaworthy, angler/fly line friendly… The Jones Brothers 1910 LT has it all.

Length20′ 1″
Beam7′ 7″
Bow Platform45″ x 71″ (LxW)
Secondary Bow Platform43″ x 68″ (LxW)
Stern Casting Platform50″ x 68″ (LxW)
(excluding motor well of 33 x 24 inches)
Stern “Bridge”27″ x 21″
Gunwales9″ wide
Dead Rise14° at transom
Fuel Capacity51 gallons
Rec HP150
Max HP200
Shaft Length25″
Hull Weight2050 lbs.
Draft12″
Cockpit Depth24″ forward
22″ inches aft
Console38″ x 43″ (LxW)
Person Capacity7
Person Load1015 lbs.
Max Load1600 lbs.

Fuel & Electrical

  • 51 Gallon Fuel Tank
  • Bennett Electric Trim Tabs
  • LED Pop-Up Bow Light
  • LED Lights (Cockpit, Navigation and Anchor)
  • Battery, Tray and Wiring Harness to Console
  • Six Gang Booted Switch Panel
  • Ten Gang Fuse Block

Console

  • Super Fish Console (SM)
  • Super Fish Windshield
  • SeaStar Hydraulic Steering
  • Stainless Steel Steering Wheel
  • Console Grab Rail
  • Ritchie Compass
  • Console Rod Rack
  • Console Tackle Locker
  • Insulated Cooler Under Forward Console Seat
  • Console Fold-Down Storage Hatch
  • USB Accessory Outlet

Fishing Features

  • Four Stainless Steel Rod Holders
  • Rod Tip Tubes Fore and Aft
  • Under Gunwale Poly Rod Racks

Hull, Deck & Cockpit

  • 100% Composite Construction
  • Fiber Glass Stringer Grid
  • Self Bailing Cockpit
  • Automatic Bilge Pump
  • Casting Platform/Fish Box (Bow)
  • Flush Anchor Locker
  • Foam Flotation
  • Four 12″ Hand Rails
  • Heavy Duty Rub Rail/SS Insert
  • In Floor Storage Under Forward Casting Platform
  • Non-Skid Gunwales and Cockpit
  • Rear Casting Platform with Center Folding Bridge and Cutting Board, Livewell (Port Rear Platform), and Storage (Starboard Rear Platform)
  • Rigging Conduit Beneath the Floor
  • Stainless Steel Fuel Fill
  • Three Pull-Up Cleats

Power

Jones Brothers exclusively uses Yamaha engines and accessories when rigging boats. The following engine is the only option available on the Cape Fisherman 1910:

  • Yamaha F150XC
  • Package includes complete instrumentation, stainless steel propeller, rigging and 10 micron stainless steel fuel filter

For more information, examine the Jones Brothers engine options and rigging pages.

Yamaha PowerMatchedâ„¢ System Warranty

All boats built by Jones Brothers Marine qualify for the Yamaha PowerMatched™ System warranty. This gives buyers a warranty on the entire power system, which matches the three year warranty that comes with the four stroke engine. In addition to the engine warranty, the PowerMatched warranty includes:

  • Digital Gauges
  • Ignition Switch
  • Controls
  • Wiring Harness
  • Fuel Filter
  • Control Cables
  • Stainless Steel Propeller

Options (chart)

  • Bimini Top
  • Casting Platform Cushion (Bow)
  • Console Cover – Half
  • Console Cover – Full
  • Console Cushion Set
  • Console Fly Rod Holders
  • Console Upper Storage Box
  • Console Upper Storage Box with Electronics Flush Kit
  • Custom Hull Color
  • Custom Hull Two-Tone w/Boot Stripe
  • Dash Storage Box
  • Dual Batteries, Trays, Switches and Wiring Harness
  • Edson Steering Wheel
  • Extra USB Accessory Outlet
  • Olive Drab Hull & Accessories
  • Poling Platform
  • Pop-Up Pole Mounts
  • Pull-Up Spring Line Cleats
  • Removable Leaning Post
  • Removable Leaning Post Seat
  • Swim Platform
  • Trolling Motor Wiring with Rub Rail Nav. Lights
  • Washdown System

Disclaimer – Due to the price volatility of marine components and accessories, the prices in the Quick Quote estimator may not always be accurate. While Jones Brothers tries to maintain accurate information on the website, the prices should be considered “estimates.” For an official quote, please continue to the last page in the estimator. This optional step emails your contact information and boat configuration to a company representative.

Previous slide
Next slide

On hand-held devices, please rotate the device sideways to view full images.

Bennett Electric Trim Tabs

Previous slide
Next slide

Jump Seat Cushions

Previous slide
Next slide

Casting Platform Cushion (Bow)

Previous slide
Next slide

Lean Post Cover for Aluminum LP

Previous slide
Next slide

Console Cooler

Seafoam Green
Olive Drab
Ice Blue
Fighting Lady Yellow
Flag Blue
Previous slide
Next slide

Custom Hull Colors

b17-olive-drab2

Olive Drab Hull & Accessories

Previous slide
Next slide

Bimini Top

Previous slide
Next slide

USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Previous slide
Next slide

Edson Steering Wheel

IMG_0306

Console Fly Rod Holders

Lean Post Cover for Fiberglass LP

Previous slide
Next slide

Console Cover – Full

Previous slide
Next slide

Dual Batteries, Trays, Switches and Wiring Harness

Previous slide
Next slide

Washdown System

box_seat_cushion

Box Seat with Cushion

removable_leanpost-01

Removable Leaning Post – This option is only available on the Cape Fisherman 20/23 with the optional forward casting deck.

Pop-Up Pole Mounts

Poling Platform (Aluminum)

custom_hull_2tone-03

Custom Hull 2Tone with Boot Stripe

Previous slide
Next slide

Casting Platform/Fish Box Forward

Previous slide
Next slide

Compass (Ritchie HF742) – Flush Mounted

T-Top Enclosure

t-top-04

T-Top with Rocket Launchers

stainless_hand_rails-02

12″ Aluminum Hand Rails

Previous slide
Next slide

Pull-Up Spring Line Cleats

lean_post_backrest-03

Removable Lean Post Backrest with Rocket Launchers

Previous slide
Next slide

Lean Post – Aluminum with Storage Box

Previous slide
Next slide

Extra USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Dash Storage Box

Previous slide
Next slide

Console Upper Storage Box

Console Rod Rack

console_cushion_set-02

Console Cushion Set

Console Cover – Half

Swim Platform