Cape Fisherman 23

The Cape Fisherman 23 has become one of our most popular boats for fishing guides. The boat is economical to run, and comfortably handles larger groups of anglers. While all the Cape Fisherman are designed for near-shore fishing, the 23′ is large enough to go offshore on nicer days. It has plenty of freeboard and flare to keep you safe and dry.

For family boating, consider adding the forward casting deck to provide seating for a boatload of kids, and increase storage capacity for camping and beach gear.

Length22′ 8″
Beam8′
Cockpit Depth23″ at stern
Dead Rise12° at transom
45° at entry
Fuel Capacity77 gallons
Rec HP200
Max HP250
Shaft Length25″
Hull Weight2350 lbs.
Draft12″
Person Capacity10
Person Load1450 lbs.
Max Load2100 lbs.

Fuel & Electrical

  • 77 Gallon Fuel Tank
  • Bennett Electric Trim Tabs
  • LED Pop-Up Bow Light
  • LED Lights (Cockpit, Navigation and Anchor)
  • Battery, Tray and Wiring Harness to Console
  • Six Gang Booted Switch Panel
  • Ten Gang Fuse Block

Console

  • Super Fish Console (STD)
  • Super Fish Windshield
  • SeaStar Hydraulic Steering
  • Stainless Steel Steering Wheel
  • Console Grab Rail
  • Ritchie Compass
  • Console Fold-Down Storage Hatch
  • USB Accessory Outlet

Fishing Features

  • Four Stainless Steel Rod Holders
  • Under Gunwale Poly Rod Racks

Hull, Deck & Cockpit

  • 100% Composite Construction
  • Fiber Glass Stringer Grid
  • Self Bailing Cockpit
  • Automatic Bilge Pump
  • Flush Anchor Locker
  • Foam Flotation
  • Three Pull-Up Cleats
  • Heavy Duty Rub Rail/SS Insert
  • Jump Seats
  • Non-Skid Gunwales and Cockpit
  • Rigging Conduit Beneath the Floor
  • Stainless Steel Fuel Fill

Power

Jones Brothers exclusively uses Yamaha engines and accessories when rigging boats. The following engines are available on the Cape Fisherman 23:

For more information, examine the Jones Brothers engine options and rigging pages.

Yamaha PowerMatchedâ„¢ System Warranty

All boats built by Jones Brothers Marine qualify for the Yamaha PowerMatched™ System warranty. This gives buyers a warranty on the entire power system, which matches the three year warranty that comes with the four stroke engine. In addition to the engine warranty, the PowerMatched warranty includes:

  • Digital Gauges
  • Ignition Switch
  • Controls
  • Wiring Harness
  • Fuel Filter
  • Control Cables
  • Stainless Steel Propeller

Options (chart)

  • 12″ Hand Rails
  • Bimini Top
  • Casting Platform Cushion (Bow)
  • Casting Platform/Fish Box Forward
  • Console Cooler
  • Console Cover – Half
  • Console Cover – Full
  • Console Cushion Set
  • Console Fly Rod Holders
  • Console Rod Rack (Aluminum)
  • Console Upper Storage Box
  • Console Upper Storage Box with Electronics Flush Kit
  • Custom Hull Color
  • Custom Hull Two-Tone w/Boot Stripe
  • Dash Storage Box
  • Dual Batteries, Trays, Switches and Wiring Harness
  • Edson Steering Wheel
  • Extra USB Accessory Outlet
  • Helm Master EX Kit – Joy Stick
  • Helm Master EX Kit + Joy Stick
  • Jump Seat Cushions
  • Lean Post – Aluminum with Storage Box
  • Lean Post – Fiberglass (STD) with Livewell
  • Lean Post Backrest without Rocket Launchers
  • Lean Post Backrest with Rocket Launchers
  • Lean Post Cover for Aluminum LP
  • Lean Post Cover for Fiberglass LP
  • Olive Drab Hull & Accessories
  • Pull-Up Spring Line Cleats
  • Rear Seat/Removable
  • Removable Leaning Post
  • Swim Platform
  • T-Top Enclosure
  • T-Top with Rocket Launchers
  • Trolling Motor Wiring with Rub Rail Nav. Lights
  • Washdown System

Disclaimer – Due to the price volatility of marine components and accessories, the prices in the Quick Quote estimator may not always be accurate. While Jones Brothers tries to maintain accurate information on the website, the prices should be considered “estimates.” For an official quote, please continue to the last page in the estimator. This optional step emails your contact information and boat configuration to a company representative.

On hand-held devices, please rotate the device sideways to view full images.

Bennett Electric Trim Tabs

Jump Seat Cushions

Casting Platform Cushion (Bow)

Lean Post Cover for Aluminum LP

Console Cooler

Seafoam Green
Olive Drab
Ice Blue
Fighting Lady Yellow
Flag Blue

Custom Hull Colors

b17-olive-drab2

Olive Drab Hull & Accessories

Bimini Top

USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Edson Steering Wheel

IMG_0306

Console Fly Rod Holders

Lean Post Cover for Fiberglass LP

Console Cover – Full

Dual Batteries, Trays, Switches and Wiring Harness

Washdown System

box_seat_cushion

Box Seat with Cushion

removable_leanpost-01

Removable Leaning Post – This option is only available on the Cape Fisherman 20/23 with the optional forward casting deck.

Pop-Up Pole Mounts

Poling Platform (Aluminum)

custom_hull_2tone-03

Custom Hull 2Tone with Boot Stripe

Casting Platform/Fish Box Forward

Compass (Ritchie HF742) – Flush Mounted

T-Top Enclosure

t-top-04

T-Top with Rocket Launchers

stainless_hand_rails-02

12″ Aluminum Hand Rails

Pull-Up Spring Line Cleats

lean_post_backrest-03

Removable Lean Post Backrest with Rocket Launchers

Lean Post – Aluminum with Storage Box

Extra USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Dash Storage Box

Console Upper Storage Box

Console Rod Rack

console_cushion_set-02

Console Cushion Set

Console Cover – Half

Swim Platform